RADii® Cement-Bond Tool - Large Diameter
Identifies cement channeling as well as generates the traditional cement bond log and a variable-density log
Applications
- Cement-bond quality
- Formation isolation
- Cement channeling
Features and Benefits
- Fully Probe® high-speed digital (HD) platform compatible
- Full SRO and memory capability
- Master calibration storage in tool memory retrievable when no free pipe is encountered in the well
- High temperature (HT) version for hostile environments
Tool Description
The Weatherford large diameter RADii segmented cement-bond tool uses a single ceramic transmitter, a sixteen-segment receiver at 3 ft, and a single receiver at 5-ft spacing. The segmented receiver generates a cement map enabling identification of cement channeling while the single receiver generates the traditional cement-bond log (CBL) and a variable-density log (VDL).
The large diameter RADii segmented cement bond tool comes in two configurations: Probe telemetry (PTX) and HD.
Specifications
Ratings and Dimensions
| PTX | HD |
Maximum temperature | 350°F (177°C) | |
Maximum pressure | 20,000 psi (138 MPa) | 15,000 psi (103.4 MPa) |
Outside diameter | 3.5 in. (88.9 mm) | |
Length | 9.35 ft (2.82 m) | |
Weight | 175.7 lb (9.40 kg) | |
Tensile strength | Tension: 40,000 lb | |
Casing/tubing OD (in./mm) | Min: 4.5 in. (115 mm) | |
Measure points (ft/m) | Amplitude, TT: 4.3 ft (1.3 m) | |
Materials | Corrosion resistant materials used throughout | N/A |
Borehole Conditions
| PTX | HD/Memory | HT |
Borehole fluids | OBM, WBM | ||
Tool positioning | Centralized with one each centralizer above and below | ||
Logging speed | Recommended: 60 ft/min (18.2 m/min) |
Electrical
| PTX | HD |
Current | 82 mA at 130 V | 90 mA at 50 V (SRO) |
Calibration
| PTX | HD |
Primary | 9.625 in. (24.4 cm) pressurized calibration tank | |
Wellsite | Free pipe, stored calibration tank waveforms on demand |
Hardware Characteristics
| Standard | HD |
Source type | One piezoelectric crystal fired at 20 kHz, 50 ms intervals | |
Sensor type | Omni receiver: One 20-kHz piezoelectric Radial receiver: One 8-segment 20-kHz piezoelectric | |
Fire rate | 20/sec | |
Waveform | Analog: 3 ft (.9 m), 5 ft (1.5 m) | |
Record time | 1,400 microns for each receiver | |
Combinability | GR, CCL, ProMac™, iQ™, temperature | |
Connections | Top: GOI box Bottom: GOI pin | |
Acquisition mode | SRO | SRO with TCU |
Measurements (all configuration except where noted)
| E1 Peak Amplitude | Sonic Waveform |
Principle | Sonic wavetrain attenuation | |
Range | 200 to 1,500 µs | |
Resolution | 3 ft/0.9 m | 5 ft/1.5 m |
Precision (1 SD) | < 1 mV | N/A |
Primary curves | Amplitude: 3ft (.9 m) | |
Secondary curves | Probe telemetry and Temperature: Head Voltage, Internal Temperature |
*Temperature sub configuration only
Reach out to optimize reservoir performance
Please fill in the form below for more information on our comprehensive and high-resolution technologies. You will hear from one of our wireline representatives shortly.
Thank you for contacting us.
Your request is being directed to the appropriate person in our organization.
We will be in touch soon.