RADii® Cement-Bond Tool - Medium Diameter
Identifies cement channeling and generates traditional cement bond log and variable-density log
Applications
- Cement-bond quality
- Formation isolation
- Cement channeling
Features and Benefits
- Fully Probe® high-speed digital (HD) platform compatible
- Full SRO and memory capability
- Storable master calibration in tool memory for retrieval when no free pipe is encountered in the well
- High-temperature (HT) version for hostile environments
Tool Description
The Weatherford medium diameter RADii segmented cement-bond tool uses a single ceramic transmitter, an eight-segment receiver at 3 ft, and a single receiver at 5-ft spacing. The segmented receiver generates a cement map enabling cement-channeling identification while the single receiver generates the traditional cement-bond log (CBL) and a variable-density log (VDL).
The medium-diameter RADii segmented cement-bond tool comes in three configurations: standard, with temperature sub, and HD.
Specifications
Ratings and Dimensions
| Standard | With Temperature Sub | HD |
Maximum temperature | 350°F (177°C) | ||
Maximum pressure | 20,000 psi (138 MPa) | 15,000 psi (103.4 MPa) | |
Outside diameter | 2.75 in. (69.85 mm) | ||
Length | 8.73 ft (2.66 m) | 9.39 ft (2.86 m) | 8.73 ft (2.66 m) |
Weight | 93 lb (42.18 kg) | ||
Tensile strength | Tension: 50,000 lb | ||
Casing/tubing OD | Min: 4.5 in. (115 mm) | ||
Materials | Alloy steel (stainless also available) | Corrosion resistant materials used throughout | SST |
Measure points | Amplitude, TT: 4.3 ft (1.3 m) | Amplitude, TT: 4.3 ft (1.3 m) | Amplitude, TT: 4.3 ft (1.3 m) |
Borehole Conditions
| PTX | HD/Memory | HD |
Borehole fluids | OBM, WBM | ||
Tool positioning | Centralized with one each centralizer above and below | ||
Logging speed | Recommended: 60 ft/min (18.2 m/min) |
Electrical
| Standard | With Temperature Sub | HD |
Current | 45 mA at 130 V | 45 mA at 130 V | 65 mA at 50 V (SRO) |
Calibration
| Standard | With Temperature Sub | HD |
Primary | 5.5 in. (13.97 cm) pressurized calibration tank | ||
Wellsite | Free pipe, stored calibration tank waveforms on demand |
Hardware Characteristics
| Standard | With Temperature Sub | HD |
Source type | One piezoelectric crystal fired at 20 kHz, 50 msec intervals | ||
Sensor type | Omni receiver: One 20 kHz piezoelectric | ||
Connections | Top: 1 3/16 in. 12-P GO box | Top: 1 3/16 in. 12-P type-A | Top: GOI box |
Combinability | GR, CCL, ProMac™, iQ™, Temperature | GR, CCL, single- or dual-spaced neutron | GR, CCL, ProMac™, iQ™, Temperature |
Acquisition mode | SRO | SRO | SRO with TCU |
Fire rate | 20/sec | ||
Waveform | Analog: 3 ft (.9 m), 5 ft (1.5 m) | ||
Record time | 1,480 microseconds for each receiver |
Measurements (all configuration except where noted)
| E1 Peak Amplitude | Sonic Waveform |
Principle | Sonic wavetrain attenuation | |
Range | 200 to 1,500 us | |
Resolution | 3 ft/0.9 m | 5 ft/1.5 m |
Precision (1 SD) | < 1 mV | N/A |
Primary curves | Amplitude: 3ft (.9 m) | |
Secondary curves | Probe telemetry and Temperature: Head Voltage, Internal Temperature |
*Temperature sub configuration only
Reach out to optimize reservoir performance
Please fill in the form below for more information on our comprehensive and high-resolution technologies. You will hear from one of our wireline representatives shortly.
Thank you for contacting us.
Your request is being directed to the appropriate person in our organization.
We will be in touch soon.